New: Breek Arms Trash Shield

This $80 blast-forwarding device weighs 2½ ounces, threads onto HUB-compatible mounts and pushes concussion downrange.

by
posted on April 27, 2026
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
Trashshield Breek 2
The Breek Arms Trash Shield is built for modern suppressor mounting systems and is a solid solution for redirecting muzzle blast downrange and away from nearby shooters.
Photo courtesy Breek Arms

Anyone who has stood next to a firearm with a brake or compensator at the range knows the experience. The shooter is fine but everyone else gets hit with a wall of concussion and noise spilling sideways. The Trash Shield from Breek Arms is a simple mechanical answer to that problem.

The device is a blast forwarder—not a suppressor—that threads onto any HUB-compatible mount using 1.375x24 threading. That covers Plan B setups along with the company’s own Breek-LOK system and similar platforms already in wide use across the suppressor-ready market. It screws on by hand, redirects muzzle blast and concussion forward and downrange, and comes off the same way when the shooter wants full compensator performance back. No tools required.

Close-up of the Breek Arms Trash Shield highlighting the machined grip cuts and Type III anodized finish on the 7075-T6 aluminum body
Angular cuts machined into the 7075-T6 aluminum body of the Breek Arms Trash Shield provide a no-slip grip for quick hand-tight installation and removal without tools. (Photo courtesy Breek Arms)

 

The use case is straightforward. At a match, nearby shooters and range safety officers on the line will feel the difference immediately. Indoor ranges and team training environments where multiple shooters are working in proximity are where side blast becomes a real issue, too. The Trash Shield does not reduce decibel levels, but it does change the direction of the blast energy, pushing it away from people standing alongside the muzzle.

Breek Arms builds the Trash Shield from 7075-T6 aluminum, the same aerospace-grade alloy used across most of its product line and finishes it with Type III hard-coat anodizing. It adds 2¼ inches of overall length and weighs 2½ ounces with a 1½-inch outside diameter. Those numbers are low enough that balance and handling should stay close to unchanged on most builds. As for the exterior, there are deep angular cuts serving a functional purpose, giving the shooter enough grip surface to thread it on and off quickly even with gloves.

One important caveat: the Trash Shield requires a separate HUB-compatible mounting device, which is not included. And when installed, the underlying muzzle device loses some of its compensating effect. That’s the tradeoff—blast goes forward instead of being used to manage recoil. For shooters who want both options available, swapping between configurations takes seconds.

The Trash Shield is available now at $79.95 through Breek Arms and authorized dealers.

Latest

Barnes 2026 Rm3gun Fiocchi 1
Barnes 2026 Rm3gun Fiocchi 1

Lanny Barnes Wins High Lady Title At 2026 Rocky Mountain 3-Gun

Lanny Barnes won High Lady in Open at the 2026 Rocky Mountain 3-Gun Championship, finishing sixth overall at the NRA Whittington Center.

Krause Adds Grand American Handicap Title to 2025 Singles Crown

Krause’s second ATA title in back-to-back years highlights an impressive performance by Team Remington at the 2026 Grand American.

New: Federal Master Class 20-Gauge Loads

Federal has added two 20-gauge loads to its Master Class sporting clays shotshell line, both shipping now at $16.99 per box.

Randi Rogers Rediscovers Rifle Competition at 2026 NRA Faces of Freedom ARC Regional Championship

Team Ruger’s Randi Rogers and Gordon Carrell deliver standout performances at NRA Faces of Freedom ARC Regional Championship in South Dakota.

Gallery: 2026 ATA Grand American World Trapshooting Championships

The 2026 Amateur Trapshooting Association Grand American in photos.

Polite Society Industries Launches Six Suppressors, Promises Fix, Replace Or Refund

Polite Society Industries launches its first suppressor line—six models, rimfire through .36 caliber—priced against the post-tax-stamp market with a money-back guarantee.

Interests



Get the best of Shooting Sports USA delivered to your inbox.