New: Magpul Pro 700 Lite SA

by
posted on January 27, 2022
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
magpul_sa_lite-1.jpg

New from Magpul, the Pro 700 Lite SA chassis (MSRP: $599.95) is compatible with short-action Remington 700 and other short-action Remington 700 footprints.

Retaining key features from the original Pro 700 chassis, Magpul says the Pro 700 Lite SA “strikes a balance between features and cost without sacrificing performance ... the Pro 700 Lite SA turns your 700-pattern rifle into the perfect bolt-action precision machine.”

Magpul Pro 700 Lite SA
The Pro 700 Lite SA chassis ($599.95) sports an injection-molded polymer grip with a five-degree forward edge sweep and enlarged palm swell with seven-degree aft edge sweep.


The lightweight design weighs in at 4.4 pounds, which is one pound less than the Pro 700. As for customization, there are 0.8 inch of comb height and 1.4 inches of LOP adjustments. Additionally, the low-profile rubber butt-pad is adjustable for height and cant.

The Pro 700 Lite SA surrounds its billet aluminum chassis with Magpul polymer. Built around the user, it is fully ambidextrous (by swapping a bolt retainer plate), and the vertical grip can be adjusted for different trigger reaches.

On the front, multiple M-LOK slots are available (left-six, right-six and bottom-seven) for mounting accessories.

As for sling attachment options, the Pro 700 Lite SA sports an ambidextrous 1.25-inch footman’s loop, a reversible quick-detach sling swivel cup and space for another one. The injection-molded polymer grip has a five-degree forward edge sweep and enlarged palm swell, with a seven-degree aft edge sweep for enhanced user comfort, along with a 0.75-inch fore and aft adjustment range using a hex wrench. An additional grip is included with a more aggressive sweep and enlarged palm swell for shooters more inclined to a less vertical grip interface (eight-degree forward/20-degree aft edge sweep).

Finally, the included large trigger guard easily accomodates gloved hands and aftermarket triggers. The AICS-pattern magazine well includes an ambidextrous mag release, plus a front barricade stop to prevent the rifle from resting on the magazine when using a barricade for support.

The Magpul Pro 700 Lite SA is made in the United States. Learn more at magpul.com.


Read more: 10 Tips For Crisp, Clean Trigger Pulls

Latest

Accuracyx Marinepistol 1
Accuracyx Marinepistol 1

Accuracy X M45A2 Battle Pistols are Tribute to Marines’ M45A1

Only 11 hand-built M45A2 Battle Pistol sets will be made, honoring each year the Marines’ M45A1 CQBP served, 2012 to 2022.

Range USA’s Newest Store Opens This Weekend in Smyrna, Tenn.

Range USA opens its 52nd store and second Nashville-area location in Smyrna, Tenn., on Sept. 18 with 20 lanes and two classrooms.

Vortex Pro Cantilever Mounts Turn One Base Into a System

Vortex’s new U.S.-made Pro Cantilever Mounts and accessories form one modular system for adding red dots, thermal clip-ons and rangefinders to rifles.

Inside the Tandemkross ADX Race Rifle

Tandemkross’ ADX line includes three models, led by a 10/22-compatible race gun with left-side charging and three-pin takedown.

Garmin Brings The Long-Range Experts At Applied Ballistics In-House

Garmin has acquired Applied Ballistics, bringing Bryan Litz’s ballistic solver and radar-built projectile data in-house after nearly a decade of partnership.

New: MDT One-Piece Night Vision Bridge

MDT’s One-Piece NV Bridge, a 13-inch, 20-MOA rail for select MDT chassis, keeps clip-on night optics aligned with the riflescope.

Interests



Get the best of Shooting Sports USA delivered to your inbox.